Denver Pricing Guide
Cost of As-Built Drawings in Denver
Transparent, square-footage-based pricing. No consultation calls, no waiting for a quote. Enter your property size below and see your exact price.
As-built drawings in Denver run $350 to $3,450 for residential projects up to 10,000 square feet, depending on how much documentation you need. A basic Matterport scan with interactive measurements starts at $350. Schematic floor plans with room-by-room dimensions start at $600. A complete drawings package with a Revit model and CAD files, produced by a Colorado licensed architect, starts at $1,800. A typical 3,000 square foot home costs $430, $720, or $2,050 depending on the package. Larger properties are priced by the same square-footage formula.
Most Denver firms in this category require a phone call or consultation before quoting. Scans & Plans publishes pricing online because we believe the cost of documenting your space should not be a mystery. The calculator below gives you an exact price for your property.
Instant price calculator
Enter your property's approximate square footage to see pricing for all three packages.
Enter your square footage above to see prices for all three packages.
How pricing works
| Package | Up to 2,000 sq ft | 2,001 to 5,000 sq ft | 5,001+ sq ft |
|---|---|---|---|
| Progress Scan | $350 flat | $350 + $0.08/sq ft over 2,000 | $590 + $0.06/sq ft over 5,000 |
| Scan + Floor Plans | $600 flat | $600 + $0.12/sq ft over 2,000 | $960 + $0.08/sq ft over 5,000 |
| Full Drawings | $1,800 flat | $1,800 + $0.25/sq ft over 2,000 | $2,550 + $0.18/sq ft over 5,000 |
Each package uses three pricing tiers. Properties up to 2,000 square feet pay the flat base price. Between 2,001 and 5,000 square feet, a per-square-foot rate applies to the footage above 2,000. Above 5,000 square feet, the per-foot rate decreases. The calculator above applies this formula automatically.
A Progress Scan uses the same square-footage pricing and starts at $350. Each visit is booked as its own scan, so a project can be documented at as many milestones as it needs.
Frequently asked questions
As-built drawings in Denver start at $350 for a basic Matterport scan of a property up to 2,000 square feet. Floor plans with room dimensions start at $600, and a full drawings package with Revit model and CAD files starts at $1,800. Pricing scales with square footage above 2,000 sq ft.
Matterport scanning captures a full property faster than traditional hand-measuring or LiDAR scanning, and the processing workflow our architectural team uses is built for efficiency. The result is accurate, design-ready documentation at a lower cost. We also publish our prices online so you know the cost before you contact us.
No. The price in our instant quote tool is the total cost for that package. No trip charges, no setup fees, no hidden costs. What you see is what you pay.
Every package has a flat base price covering properties up to 2,000 square feet, so a 900 square foot ADU and a 1,900 square foot bungalow both price at the base rate: $350 for a Progress Scan, $600 for Scan + Floor Plans, and $1,800 for Full Drawings. Below 200 square feet we are usually not the right fit, and we will tell you so.
Each package has a flat base price for properties up to 2,000 square feet. Above 2,000 sq ft, a per-square-foot rate applies to the overage. The rate decreases at 5,000 sq ft, so larger properties benefit from volume pricing. Enter your exact square footage in the calculator above for a precise quote.
Payment is collected at the time of booking through our secure online checkout. For larger commercial projects, contact us to discuss invoicing arrangements.
Ready to document your space?
Get an instant price for your project: no phone calls, no waiting.
Get Your Quote